弧齿磨 GLEASON 463 1984年
Technical details:
Max pitch diameter 863 mm (34'').
Max face width 76 mm (3'')
with Full set of dressers. Hydraulic chucking. Guards. Coolant
Maximum Cone Distance (30-Degree Spiral
Angle w/12" Dia Wheel) 15"/(381mm)
Maximum Pitch Angle, 90-Degree Dhaft 70-DEGREES, 34'
Minimum Pitch Angle, 90-Degree Shaft 5-DEGREES, 42'
Maximum Pitch Diameter: (90-Degree Shafts):
0-degree spiral angle, 1:1 ratio 15.5"/(393.7mm)
0-degree spiral angle, 3:1 ratio 23"/(584.2mm)
30-degree spiral angle, 1:1 ratio 21"/(533.4mm)
30-degree spiral angle, 3:1 ratio 31.5"/(800.1mm)
40-degree spiral angle, 1:1 ratio 22.5"/(571.5mm)
40-degree spiral angle, 3:1 ratio 34"/(863.6mm)
Coarsest DP (Module) 2 DP
Coarsest DP (Module) (Metric) (12.7-Module)
Maximum Face Width 3"/(76.2mm)
Work Spdl Taper Hole Dia.(Large End) 3-19/32"
Work Spindle Bore Taper (Per Ft) 39/64"
Work Spindle Thru-Hole Diameter 6"/(152mm)
Std Grind Wheel OD 6"-8"
Std Grind Wheel OD (Metric) (1852-203mm)
Max. Wkhead Offset Above/Below Ctr 4.5"
Max. Wkhead Offset A/B Ctr (Metric) (114.3mm)
Distance From Machine Center To
Spindle Nose 3"-20.5"
Distance From Machine Center To
Spindle Nose (Metric) (76-500mm)
Feed Rate (Seconds Per Tooth) 1.9-11.8
Approx. Floor Space 135" x 81"
Approx. Floor Space (Metric) (3429x2057mm)
Approx. Overall Machine Ht 97"
Approx. Overall Mach Ht (Metric) (2464mm)
Approx. Machine Net Weight 23,000 LBS.
Approx. Machine Net Weight (Metric) (10,455 kGs)
NOTES: Suitable For The Grinding Of Spiral Bevel,
Zerol Bevel, & Hypoid Gears Up To 34" (864mm)
Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face
Width & 2 DP (12.5-Module)
with Full set of dressers. Hydraulic chucking. Guards. Coolant
Maximum Cone Distance (30-Degree Spiral
Angle w/12" Dia Wheel) 15"/(381mm)
Maximum Pitch Angle, 90-Degree Dhaft 70-DEGREES, 34'
Minimum Pitch Angle, 90-Degree Shaft 5-DEGREES, 42'
Maximum Pitch Diameter: (90-Degree Shafts):
0-degree spiral angle, 1:1 ratio 15.5"/(393.7mm)
0-degree spiral angle, 3:1 ratio 23"/(584.2mm)
30-degree spiral angle, 1:1 ratio 21"/(533.4mm)
30-degree spiral angle, 3:1 ratio 31.5"/(800.1mm)
40-degree spiral angle, 1:1 ratio 22.5"/(571.5mm)
40-degree spiral angle, 3:1 ratio 34"/(863.6mm)
Coarsest DP (Module) 2 DP
Coarsest DP (Module) (Metric) (12.7-Module)
Maximum Face Width 3"/(76.2mm)
Work Spdl Taper Hole Dia.(Large End) 3-19/32"
Work Spindle Bore Taper (Per Ft) 39/64"
Work Spindle Thru-Hole Diameter 6"/(152mm)
Std Grind Wheel OD 6"-8"
Std Grind Wheel OD (Metric) (1852-203mm)
Max. Wkhead Offset Above/Below Ctr 4.5"
Max. Wkhead Offset A/B Ctr (Metric) (114.3mm)
Distance From Machine Center To
Spindle Nose 3"-20.5"
Distance From Machine Center To
Spindle Nose (Metric) (76-500mm)
Feed Rate (Seconds Per Tooth) 1.9-11.8
Approx. Floor Space 135" x 81"
Approx. Floor Space (Metric) (3429x2057mm)
Approx. Overall Machine Ht 97"
Approx. Overall Mach Ht (Metric) (2464mm)
Approx. Machine Net Weight 23,000 LBS.
Approx. Machine Net Weight (Metric) (10,455 kGs)
NOTES: Suitable For The Grinding Of Spiral Bevel,
Zerol Bevel, & Hypoid Gears Up To 34" (864mm)
Pitch Diameter At 3:1 Ratio, 3" (76.2mm) Face
Width & 2 DP (12.5-Module)
珠海龙(北京)设备进出口公司
电话/传真：+86(10)8732 6402
QQ：1205441440
E-MAIL:zhl2002@126.com
公司网址http://www.zonemachine.cn
联系人:刘先生
珠海龙(北京)设备进出口公司(ZONEMACHINE LTD.CO.)ZHL2002
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
