型号 Type |
ZQ3032×8 |
ZQ3032×9 |
最大钻孔直径 Max.drilling diamerer |
32mm |
32mm |
主轴下端到底座工作面(最小距离) Min.tsnce between the main shaft downwad face and the base platfom |
130mm |
450mm |
主轴下端到底座工作面(最大距离) Max.distance between the main shaft downward face and the base platfom |
900mm |
900mm |
主轴中心线至立柱母线最大距离 Max.distance between the main shaft center and the post center |
1000mm |
1000mm |
主轴中心线至立柱母线最小距离 Min.distance between the main shaft center and the past center |
200mm |
200mm |
摇臂回转角度 Turning angle of the arm around the post |
360° |
360° |
摇臂升降速度 The down and up speed of the arm |
1000mm/minule |
1000mm/min |
立柱直径 Diameter of the post |
ф200mm |
ф200mm |
主轴锥孔 Taper of main shaft |
莫氏4号(modulus 4) |
莫氏4号(modulus 4) |
主轴最大行程 The stoke of main shaft |
250mm |
250mm |
主轴变速级数 Speed changing stage of main shaft |
8级(stages) |
8级(stages) |
主轴变速范围 The main shaft speed changing range |
46~1200r.p.m |
46~1200r.p.m |
主轴进给量级数 Feeding stage of main shaft |
N/A |
6级(stages) |
主轴进给范围 Feeding limits of main shaft |
N/A |
0.07~0.42mm/r |
电动机功率 Power of main motor | 0.8kw/1.1kw | 0.8kw/1.1kw或(or)1.1kw/1.5kw |
主电动机转速 Speed of main motor(two) | 950r.p.m or 400r.p.m | 950r/min or 1400r/min |
摇臂升降电动机功率及转速 The power of the arm up and down driving motor |
0.55kw 1400r.p.m |
0.55kw 1400r.p.m |
冷却泵电动机功率 The power of cooling pump motor |
40w |
40w |
机床重量 Net weight of machine |
1500kg |
1600kg |
机床外型尺寸(长×宽×高) Dimension(L×W×H) |
1550×700×1850mm |
1550×700×1850mm |
ZQ3032×8
注:联系我时,请说是在“傲立机床网”上看到的,谢谢!