GX480 Plus是桥堡品牌的一款高品质、高配置立式加工中心,结构紧凑,功能强劲;为同时对速度和精度有较高要求的应用而设计制造。GX480Plus采用符合最高标准的工业灰铸铁制造,性能稳定可靠。全数字化控制,X,Y和Z轴快速移动速率高达
Axis Travel
行程
Table (X axis)
X轴 480mm
Saddle (Y axis)
Y轴 400mm
Head (Z axis)
Z轴 430mm
Positioning
快速进给速率
Auto Mode (X and Y axes)
自动进给模式(X、Y轴) 36m/min
Auto Mode (Z axis)
自动进给模式(Z轴) 36m/min
Manual Mode (X,Y and Z axes)
手动进给模式(XYZ轴) 0-9m/min
Feedrate Range (X, Y and z axes)
进给速率范围(X Y Z轴) 2.5-15m/min
Acceleration x/y/z,Fanuc
加速度(x、y、z轴,Fanuc) 4.8/4.8/4.8m/ s2
Minimum Increment
最小增量输入 0.001mm
Ball Screw Diameter and Pitch(X, Y)
滚珠丝杠直径 (X, Y) 32mm
Ball Screw Diameter and Pitch (Z)
滚珠丝杠直径 (Z) 32mm
Spindle
Spindle Speed Range
主轴转速范围 10,000 RPM
Spindle Motor HP Rating (15 min.)Fanuc
Fanuc主轴电机功率(15分钟连续功率) 10 hp (7.5kW)
Spindle Torque 8,000 RPM (15 min.) Fanuc
Fanuc主轴电机8,000 RPM时扭矩(15分钟连续值) 35 ft./lbs(47.7Nm)
Retention Force
保持力 1322 lbsf/5880Nm
Spindle Taper
主轴内锥 No. 40
Tool Holder
Distance from table surface to Spindle Gauge Plane
主轴鼻端到工作台距离 150-580mm
Worktable
工作台
Working surface
台面尺寸 600×400mm
Table load
工作台承重能力 661lbs. (300 kg)
Number of T-Slots
T型槽数量 125mm centers
T-Slot Size
T型槽尺寸 14 mm
Control
控制系统
Fanuc 0iMD
Automatic Tool Changer
Swing Arm Style ATC
机械臂式换刀系统
Type of tool shank
刀柄类型 BT40 or CT40 taper
Magazine capacity
Tool Select by Shortest Path and Random Select Bi-Directional
随机就近换刀 双向式
Maximum tool diameter (Adjacent pockets)
最大刀具直径(相邻有刀) 80 mm
Maximum tool diameter (With adjacent pockets)
最大刀具直径(相邻无刀) 150 mm
Maximum Tool Length
最大刀具长度 190 mm
Maximum Tool Weight
最大刀具重量 13.2 lbs. (6kg)
Random Tool change time (tool to tool/c to c)
随机换刀时间(刀到刀/削到削) 2.2/4.5 sec.
Coolant
冷却
Coolant tank capacity
冷却液箱容量 26 US gallons (98.4L)
Accuracy(ISO 230-2)
精度(ISO 230-2)
Positioning
定位精度 0.010mm
Repeatability
重复精度 0.004mm
Machine Size
机床外形尺寸
Machine height
机床高 2,088mm
Floor space
占地 1,529 x 2,210mm
Mass of machine
机床重量 5,764 lbs (2,615kg)
Service Requirements (Fanuc)
电源需求(Fanuc)
Electrical Supply (Input) Structure Balanced 3-phase
输入电源电性结构 平衡3相
Cycles 频率 60 Hz
Power 满载电流 65 FLA
Voltage – Fanuc
Fanuc系统适配的电源电压 220 volt
Note: Other voltages require an external transformer
其它电压需求需要配置外置变压器
Compressed Air (Pressure Flow)
压缩空气(空气流量) 80 psi/4.9 cfm
Nozzle Coolant
冷却液喷嘴和冷却液压力 10.5 gal/min(40 L/min) @25 psi
注:联系我时,请说是在“傲立机床网”上看到的,谢谢!