| 工况管理系统 |
| Condition Management System |
| 主要配置与性能 |
| Main configuration and performance |
| CMS系列工况管理系统通过信号采集、处理、反馈，对电源输出电压、电流与给定值相比较，判断加热零件是否合格。当输出电压或电流超过上下限范围时，设备将自动停机并发出报警。设备同时配有通讯功能及USB接口，方便用户备份打印。并可根据用户需要选择通道数量及内存大小。 1. 测量精度±0.2%FS(0～４５℃,10～85%RH); 2. 在线自校正自诊断； 3. 信号全隔离,提供24Ｖ隔离配电； 4. 基于SmartBus模块总线,定制特殊模块； 5. 采用非易失性存储器,无须后备电池； 6. 记录时间长达32年。 |
| CMS series work condition management system compared output voltage and current of power supply with the given value by signal acquision ,processing and feedback, to detemine whether the heating parts are eligible. When the output voltage or current exceeds the upper or low limit, the equipment will automatically stop and alarm.Equipment also equipped communication device and USB interfaces to easy for user backup printing.And it can select the number of channels and memory size according to user need. 1. Measuring accuracy±0.2%FS(0-45℃RH). 2. Online self-correcting and self-diagnosing. 3. Full cut off the signal, provide 24V isolated power distribution. 4. Based of Smart Bus module bus, customized special module. 5. Adopt un-losable memory, no battery backup. 6. Recording time up to 32 years. |
 |
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
