电源变压器、感应器、水冷系统统—设计制造成—套系统。系统具有纵向(沿床身轴向)运动、垂直于机床的进退运动、上升下降运动，感应器主运动扫描。
电源工作频率10kHz-30kHz

Main characteristics of the equipment
A power transformer, an inductor and a water-cooling system are uniformly designed and manufactured into a set of system. The system can make longitudinal motion (along the vertical direction of a bed), advance and retreat motion vertical to the machine tool, as well as ascending and descending motion, and scans the major motion of the inductor.
Work frequency of the power supply: 10 to 30kHz
 

1、超音频感应加热电源
2、水冷机组
3、感应器
4、三维运动机构
5、操作箱

The equipment mainly consists of the following units:
1. Superaudio induction heating power supply
2. Water-cooling unit
3. Inductor
4. Three-dimensional motion mechanism
5. Operation case
 

纵向行程： 4m、8m、12m
纵向行进速廑： lOmm/分—400mm/分
横向行程： 300mm
横向调节线速度：20mm-lOOmm
升降高度行程： 600mm
感应器晨低高度：700mm
升降线速度(快速)：600mm/min
(微调)：20mm/5

Major technical parameters

Longitudinal stroke: 4m, 8m and 12m

Longitudinal travelling speed: 10 to 400mm/min

Transverse stroke: 300mm

Transverse regulating linear speed: 20 to 100mm

Lift height stroke: 600mm

Inductor ultra-low height: 700mm

Lift linear speed (high speed): 600mm/min

 (Fine tuning): 20mm/5