| 主要配置与性能 |
| Main configuration and performance |
组合式高频加工中心
Combination HF processing center
一拖二多功能组合高频加工中心
1.可满足轴类、齿轮类、盘类不同加工特性高频热处理
2.智能化一键开机，电源参数可记录、存储、打印
3.机电一体化造型，一台电源，两个不同特性的机床。构件防锈、防磁、防腐
4.冷却介质流量、压力自动控制
Multi-Function Combination HF Processing Center (two lathes actuated by one power supply)
1.Perform high-frequency heat treatment for shafts, gears and discs with different processing requirements
2.Intelligent one-key start-up function capable of recording, storing and printing power supply parameters.
3.Mechatronics modeling with components proof against rust, magnet and corrosion, including one power supply and two lathes
with different features.
4.Auto control of cooling medium flow and pressure
参数表示方法Representation for parameters
GGQFH2- L500×Φ60-Φ100×N8
GGQ100表示固态电源IGBT100KW,功率大小根据负载的大小而决定。
FH2表示复合一拖二（一台电源，两个机床）
L500×Φ60表示轴类工件直径为60mm，长度500mm。
Φ100XN8表示Φ100的圆盘，8个单位
GGQFH2- L500×Φ60-Φ100×N8
GGQ100 indicates solid power supply IGBT100KW while the power level depends on the load.
FH indicates composite type with two lathes actuated by one power supply (one power supply and two lathes included)
L500×Φ60 indicates 60mm diameter and 500mm length for shaft piece.
Φ100×N8 indicates Φ60 disc and 8 stations.
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
