主要配置与性能
Main configuration and performance
1.采用液晶显示数控系统，可根据不同工件的要求，编制及储存多种热处理工艺程序。
2.控制精度及自动化程序高，热处理后工件一致性好。
3.工件旋转采用变频无级调速。
4.床身采用钢板焊接，整体去应力处理。
5.采用标准直线导轨。
6.加热、喷水、时间控制集中于机床控制系统。
1. Using liquid crystal display numerically controlled system, which can organize and store various heat-treating process program according to requirements of different workpieces.
2. High control precision and automaticity, good consistency of heat-treating workpiece.
3. Using frequency conversion stepless governing for workpiece rotating.
4. Bed is welded by steel plate. It should be eliminated stress in total.
5. MUsing standard beeline guide rail。
6. Heating, spray water and time focus on the machine control system.
序号No. 产品名称
Name 产品型号
Model 最大行程
Max.Length mm 回转直径
Rotary Diameter mm 重量t 备注
Remarks
1 光杆专用淬火机床
Hardening Machine Special for Rod GCWG-2000 2000 200 3.1 数控CNC
2 GCWG-2500 2500 3.8 数控CNC
3 GCWG-3000 3000 4.5 数控CNC
4 GCWG-3500 3500 5.1 数控CNC
5 GCWG-4000 4000 5.7 数控CNC
6 GCWG-4500 4500 6.4 数控CNC
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
