端面铣床的特点：
1．工作台进给及铣头上下进给均采变频调速，工件可沿工作台长向铣削，也可由铣头上下铣削；
2．铣头设置了内置飞轮，以增加切削平稳性。铣头内齿轮均采用了20Cr渗碳淬火，并经过了磨齿工艺。齿轮具有良好的耐磨性及耐冲击性能；
3． 铣头采用了独立润滑泵润滑，各导轨采用手动润滑泵润滑，各走刀箱采用浸油润滑。
4．可据用户要求方便的将铣头换成镗铣头，使机床具有镗削功能。
the characteristics of face boring and milling machine
Worktable feed and milling head (up and down)feed adopt frequency Control ,This machine
can solve workpiece facade machining and the length overtical machining.
The milling head install the internal flywheel, in order to increase the cutting stability.
Milling head internal gear adopts 20 cr carburizing and quenching, and get though gear grinding
process， Gear has a good wear resistance and impact resistance performance
Milling head has adopted independent lubrication pump to lubricate, every guide uses the
manual lubrication pump to lubricate, the feed- box adopts oil lubrication
The user can substitute milling head for boring and milling head according to the user's
request,make the machine l with the functions of boring
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
