数控落地铣镗床是用途较为广泛的重型机床,本机床有足够的功率和刚性,能满足铣削的要求,又有较高的精度,能满足镗削要求,所以本机床适用于对大型零件进行平面铣削和镗削加工。镗轴和铣轴装在能作轴向移动的方滑枕里,在方滑枕前端面还可安装各种附件(如垂直铣头、万能铣头、伸长铣头、平旋盘等,根据特殊订货供应),因此,采用本机床加工重量大、形状复杂的零件,能在一次装夹内完成多种工序。如果与回转工作台配合使用,则其工艺范围能进一步扩大。是能源、军工、船舶、电力、核工业、交通、橡胶、矿业、冶金、重型机械等国家重点行业所需的关键设备。
Floor type boring milling machine is used for planar milling and boring of large parts and it is wide-range in application. The machine has enough power and rigidity to meet the requirement of milling. It also has high accuracy to meet the requirement of boring.
Boring spindle and milling spindle are mounted in a square ram which can be axially moved.
Various accessories (such as vertical milling head, universal milling head, elongated milling head, flat chuck etc according to special order ) can be installed in the front of square ram. Therefore, the machine can process large and complex parts . It can complete multiple processes after one time setup. Its processing range will be further expanded if work together with work table.
Floor type boring milling machine plays on important role in energy, military, shipbuilding, electric power, nuclear industry, transportation, rubber, mining, metallurgy, heavy machinery and other key state industries.
项目ITEM |
单位UNIT |
T6913 |
镗轴直径 Boring spindle diameter |
mm |
130 |
铣轴端部直径 Milling spindle end diameter |
mm |
221.44 |
滑枕尺寸(宽×高) Ram dimension(width×height) |
|
350×380 |
镗轴锥孔 Spindle taper |
|
ISO-50 |
镗轴行程 Boring spindle travel |
mm |
800 |
滑枕行程 Ram stroke |
mm |
700 |
镗轴与滑枕总行程 Total travel of boring axis and ram |
mm |
1500 |
主轴箱行程 Travel of headstock |
mm |
2000-4000 |
立柱行程 Column transverse travel |
mm |
4000-12000 |
铣轴最大钮矩 Maximum torque of milling spindle
|
Nm |
6000 |
主轴转速范围(无级) Spindle speed range (stepless) |
r/min |
2-600 |
镗轴进给范围(无级) Boring axis feed range (stepless) |
mm/min |
1-1500 |
滑枕进给范围(无级) Feed range of Ram ( stepless) |
mm/min |
1-3000 |
主轴箱进给范围(无级) Feed range of headstock |
mm/min |
1-6000 |
主轴箱快速移动速度 Rapid speed of headstock |
mm/min |
6000 |
立柱进给范围(无级) Feed range of column (stepless) |
mm/min |
1-6000 |
立柱快速移动速度 Rapid speed of column |
mm/min |
6000 |
主传动电机功率 Power of main drive motor |
KW |
37 |
机床外形尺寸(长×宽×高) Overall dimensions(L×W×H) |
mm |
9220×3300×6385 |
注:联系我时,请说是在“傲立机床网”上看到的,谢谢!