| 结构特点： | ||||
| 1、立柱：宽型设计和刚性十足的可对应重磨削的立柱，采用了双层壁构造 | ||||
| Post:The post of double-wall structure with high width and sufficient rigidity can be re-ground | ||||
| 2、砂轮轴：采用了超精密向心止推滚柱轴承的圆筒形高性能单元组件式砂轮轴，扭力大，耐重成型切削，采用持久润滑脂密封，无需进行保养 | ||||
| Grinding wheel axis:The cylindrical modular grinding wheel axis with extra-precise radial thrust bearing has large torque,good resistance against formation and grinding,permanent lubricating seals for no need of maintenance | ||||
| 3、进给导向面：前后的导向，V-V型结构扩大跨距，蜂巢中空结构抗变形能力强，精度恒定持久 | ||||
| Feeding guide face:longitudinal guide based on V-Vstructure to expand span,the hollow structure of honeycomb is resistant against deformation,permanent and constant in accuracy | ||||
| 4、前后进给手柄：由滚珠螺杆和高精度液压电机构成可靠的驱动构造，配有安全机构，保证在自动进给过程中手动手柄无法转动，通过手柄的单次操作可进行手动 | ||||
| Longitudinal feed handle:The drive structure is reliable and composed of ball screw and highly accurate hydraulic motor.It is equipped with safety gears to ensure that the handle cannot rotate during automatic feeding,the handle can be manually operated by single operation. | ||||
| 5、构架/滑动座架/工作台：充分保持了框架同幅度、滑动座架幅度，工作台的伸出部分控制在最小程度，实现全支撑抗变形能力强 | ||||
| Frame/sliding saddle/table:The extent of frame and extend of sliding saddle are fully maintained,theextension of table is minimized to provide full support and good resistance against deformation. | ||||
| 6、自由落差式自动润滑：采用的是被推压到立柱上部的润滑油根据落差自动的向各异向面进行供油的方式。液压自然的保持稳定，导向面的油膜厚度也一直保持均匀 | ||||
| Free-fall automatic lubricating:The lubricant pushed to the top of the post is supplied to every surface by free fall.The hydraulic pressure is constant ang stable,the oil membrane on guiding face remains even. | ||||
| 技术参数： | ||||
| 项 目 | 单位 | ZHM-618M | ||
| 尺寸 | 工作台面尺寸（长×宽） | mm | 450×150 | |
| 工作台移动量（手动：左右×前后） | 465×160 | |||
| 工作台面至砂轮下面的距离 | 357.5 | |||
| 可安装标准磁台的尺寸（长×宽×高） | 350×150 | |||
| 加工工件最大重量（含磁台） | kg | 60 | ||
| 工作台 | T型槽尺寸×槽数 | mm×No | 17×1 | |
| 左右进给速度（平均） | m/min | / | ||
| 手轮每转进给量 | mm | / | ||
| 前后手动进给 | 手轮旋转1周进给量 | mm | 5 | |
| 刻度盘1刻度进给量 | mm | 0.02 | ||
| 前后自动进给 | 间歇进给 | mm | / | |
| 连续进给速度 | m/min | / | ||
| 砂轮头 | 自动切入进给量（纵横＆横磨） | mm | / | |
| 手动进给 | 手轮旋转1周进给量（×0.1/×1/×10） | 1 | ||
| 刻度盘1刻度进给量（×0.1/×1/×10） | 0.005 | |||
| 无火花磨削 | 次 | / | ||
| 上下速进速度 | mm/min | / | ||
| 砂轮 | 外径（50/60HZ）×宽×内径 | mm | ø180×13×ø31.75 | |
| 转速（50/60HZ） | RPM | 3000/3600 | ||
| 马达 | 主轴马达 | KW/P | 1.1/1.5 | |
| 液压马达 | ||||
| 上下伺服马达 | KW | |||
| 电源 | 电源容量（含特别附带的卡盘、注入装置） | KVA | 2 | |
| 外形尺寸 | 宽×深×高 | mm | 1675×1214×1968 | |
| 机床重量 | 净重 | kg | 880 | |
| STANDARD ACCESSORIES/标准附件 | ||||
| 附件名称 | 数量 | 单位 | ||
| 砂轮（直径*厚度*孔径）GRINDING(dia.*width*bore)180*13*31.75mm | 1 | 片/PCS | ||
| 砂轮法兰及拨取螺母/FLANGE | 1 | 组/SET | ||
| 砂轮平衡棒/BALANCE BAR | 1 | 支/PCS | ||
| 钻石修整座及钻石笔/DIAMOND DRESSER WITH A BASE | 各1 | 个/PCS | ||
| 水平调整螺丝及基础座/LEVELLING SCREWS WITH BLOCKS | 5 | 组/SET | ||
| 吊钩/EYE RING | 4 | 支/PCS | ||
| 工具箱及必要工具/TOOL BOX WITH ADJUSTING TOOLS | 1 | 组/SET | ||
| 润滑油/LUBRICATING OIL | 2.5 | 公升/L | ||
| 石英灯/HALOGEN LAMP | 1 | 盏/PCS | ||
| 使用说明书/OPERATION MANUAL | 1 | 份/COPY | ||
| OPTIONAL ACCESSORIES 特殊附件 | ||||
| Dust Suction System/吸尘装置 | ||||
| Coolant System come with Magenetic Dsut Separator/吸尘注水装置 | ||||
| Gringding wheel Balancing Apparatus/砂轮平衡装置附平衡棒 | ||||
| Magnetic Chuck Permanent or Electro/电磁台-永磁或电磁 | ||||
| Dverhead Dresser-Manual/手动上砂轮修整装置 | ||||
| Digilal Readoul for Cross/Vertical Axis/光学尺 | ||||
| Spindle Speed Inverter/砂轮轴变频器 | ||||
| Spare Wheel Adaptor/备用砂轮法兰 | ||||
注：联系我时，请说是在“傲立机床网”上看到的，谢谢！
