DIMENSION
SPECIFICATIONS
APPLICATIONS
DIMENSION
SPECIFICATIONS
MODEL LS 1000x900 L1000x1400
SWING OVER BED 1,220 mm
SWING OVER CROSS SLIDE 750 mm
SWING OVER COVER 1000 mm
CENTER HEIGHT 650 mm
WIDTH OF CARRIAGE 945 mm
WIDTH OF CROSS SLIDE 400 mm
Z-AXIS TRAVERSE 900mm / 1,400mm
CONTROL STD. FANUC 0iTC
OPT. SIEMENTS 802D solution line
WIDTH OF BED 610mm
BED WAY 2-V-way
MACHINE LENGTH 6,400mm / 6,900mm
HEADSTOCK :
SPINDLE BORE Ø1 53mm(6") Ø 230mm(9") Ø 305mm(12") Ø 405mm(16") Ø 505mm(20")
SPINDLE NOSE A2-11
A2-15
A2-20
A2-28
A2-28
SPINDLE SPEED 9~600rpm
9~500rpm
7~400rpm
6~300rpm
6~200rpm
SPINDLE CENTER MT#6
SPINDLE POWER 22/26KW (FANUC αi)(STD) ; 30/37KW (OPT)
TURRET :
TURRET MODE STD. H6-450 servo turret
OPT. H8-450 servo turret
TOOL SIZE 40 mm
TAILSTOCK Without
FEED :
X-AXIS RAPID TRAVERSE 6M/min
X-AXIS BALLSCREW DIAMETER Ø4 0*P5
X-AXIS FEED RANGE 0.1mm/min~300mm/min
X-AXIS TRAVERSE 650 mm
X-AXIS SERVO MOTOR 3KW (FANUC αi)
Z-AXIS RAPID TRAVERSE 6M/min
Z-AXIS BALLSCREW DIAMETER Ø63mm*p10 (In center of bed ways)
Z-AXIS FEED RANGE 0.1mm/min~300mm/min
Z-AXIS TRANSMITTING 1:4 Precision gear reducer
Z-AXIS SERVO MOTOR 4KW (FANUC αi)
STANDARD ACCESSORIES :
LUBRICATION PUMP 25 W
COOLANT PUMP 1/2HP (STD) / 15 Bar high pressure (OPT)
HYDRAULIC PUMP 2HP
CHIP REMOVING STD. FRONT CHIP CONVEYOR + REAR CHIP CONVEYOR
GUARD STD. REAR SPLASH GUARD + FRONT 2 DOORS
OPT. FULLY ENCLOSED GUARDING
NOTE :
注： 联系我时，请说是在“傲立机床网”上看到的，谢谢！
加为好友
