参数\型号 | CH6150B | |
加工能力 CAPACITIES | 床身上最大回转直径 Max.swing over bed mm | 500 |
刀架上最大回转直径 Max.swing over carriage mm | 290 | |
中心距 Center distance | 750\1000\1500mm | |
床身宽度 Bed width | 420mm | |
主轴 SPINDLE | 主轴孔径 Spindle hole | Φ80mm |
主轴端部尺寸 Spindle nose | C6 | |
主轴锥孔 Spindle taper | MT6 | |
主轴转速范围(级数)Spindle speeds(Number) | 15-1600 rpm(18 Steps) | |
进给 FEEDS | 公制螺纹范围(种数)Metric threads range(Kinds) | 0.5-240 mm(66 Kinds) |
英制螺纹范围(种数)lnch threads range(Kinds) | 80-0.25/inch(49 Kinds) | |
模数螺纹范围(种数)Moudle threads range(Kinds) | 0.25-120 mm (57 Kinds) | |
径节螺纹范围(种数)Diametral threads range(Kinds) | 160-7/16 D.P (50 Kinds) | |
周径螺纹范围(种数)After weeks thread range(Kinds) | 5-1/10 CP (31 Kinds) | |
拖架 CARRIAGE | 横滑板行程 Cross slide travel | 290mm |
小刀架行程 Compound rest travel | 150mm | |
车刀杆截面尺寸 Cross-section size of toolshank | 25*25mm2 | |
尾座 JAILSTOCK | 尾座套筒锥度 Taper of tailstock sleeve | MT5 |
尾座套筒直径 Dia.of tailstock sleeve | 75mm | |
尾座套筒行程 Travel of tailstock sleeve | 150mm | |
主电机 Main motor power | 7.5KW |
注:联系我时,请说是在“傲立机床网”上看到的,谢谢!